Adamas
Forged hunting knife.
Blade:
Hand forged W110 carbon steel (1.1545). Differentially hardened with clay coating. Flat bevels. Hardness 59-60 HRC. Etched and polished finish.
Handle:
Guard and pommel - hammered, hardenned and blued carbon steel. Handle - brass, bronze, fiber, damascus steel (1.2842 + 1.2767) and Arizona desert ironwood. Hidden tang construction with riveted pommel.
Sheath:
Cow hide 4mm thick and ostrich leg skin.
Size:
OAL - 33,5cm, blade 20cm, blade thickness 7mm.
Weigth:
540g.
Gryphus
Hunting knife
Blade:
O2 carbon tool steel (also Bohler K720, 1.2842...). Flat bevel grind. Etched finish with steel structure revealed. Hardness 60 HRC.
Handle:
Guard - hammered, blued and polished mild steel. Handle - st. steel, fiber, piece of A.desert ironwood and stabilized birch. Hidden tang construction secured by a st. steel pin.
Sheath:
Cow hide 4mm thick. Two sided horizontal carry.
Size:
OAL - 33,5cm, blade 19,5cm, blade thickness 6mm.
Weigth:
450g.
Artemis
Hunting knife.
Blade:
Forged W110 (EZH, ČSN 19191) carbon steel. Differentially hardenned with clay coating. Polished and etched finish. Flat bevels. Hardness 59 HRC.
Handle:
Guard and pommel - hammered, blued and polished mild steel. Handle - st. steel, piece of stabilized maple burl and Arizona desert ironwood (Olneya tesota). Hidden tang construction with riveted pommel.
Sheath:
Cow hide and bull frog skin.
Size:
OAL - 34,5cm, blade 22cm, blade width 4cm, blade thickness 5mm.
Weigth:
455g.
Achilles
Forged knife
Blade:
Forged W110 carbon steel (1.1545 or ČSN 19191). Differentially hardenned with clay. Combined bevel grind (flat and hollow). Etched nad polished finish. Hardness 59 HRC.
Handle:
Guard and pommel - hammered, hardenned, blued and polished spring steel. Handle - Arizona desert ironwood (Olneya tesota), brass, copper, bronze and fiber. Hidden tang construction with riveted pommel.
Sheath:
Cow hide and ostrich leg skin.
Size:
OAL - 375mm, blade 235mm, blade thickness 6mm.
Weigth:
645g.
Deimos
Hunting knife.
Blade:
Blade - forged W110 carbon steel (1.1545). Differentially hardened with clay coating. Wavy hamon. Flat bevels. Hardness 60 HRC. Etched and polished finish.
Handle:
Guard and pommel - hamered, hardened and polished carbon steel. Handle - fiber, bronze, copper, damascus steel (hardened) and Arizona desert ironwood (Olneya tesota). Hidden tang construction with riveted pommel.
Sheath:
Cow hide and bull frog skin
Size:
OAL - 33cm, blade 20cm, blade thickness 6,7mm.
Weigth:
565g.
Phobos
Hunting knife.
Blade:
Forged W110 carbon steel (1.1545). Differentially hardened with clay coating. Wavy hamon. Flat bevels. Hardness 60 HRC. Etched and polished finish.
Handle:
Guard and pommel - hamered, hardened, polished and blued carbon steel. Handle - fiber, bronze, copper, damascus steel (hardened) and Arizona desert ironwood (Olneya tesota). Hidden tang construction with riveted pommel.
Sheath:
Cow hide and bull frog skin.
Size:
OAL - 34,5cm, blade 21,5cm, blade thickness 6,9mm.
Weigth:
575g.
Nergal
Hunting knife.
Blade:
Elmax - PM stainless steel. Hammered sides. Flat bevels. Etched and polished surface finish. Hardness 59 HRC.
Handle:
Guard and pommel - hammered and polished st. steel. Handle - Dezert ironwood and stabilized maple burl. Hidden tang construction with riveted pommel.
Sheath:
Cow hide 4mm and bull frog skin.
Size:
OAL - 32,5cm, blade 19cm, blade thickness 4,5mm.
Weigth:
430g.
Barracuda
Forged knife.
Blade:
Forged W110 carbon steel (1.1545 or ČSN 19191). Differentially hardened with clay coating. Wavy hamon. Etched and polished finish. Flat bevel grind. Hardness 59 HRC.
Handle:
Guard - D-guard forged out of carbon steel. Hamered, hardened and polished. Handle - stabilized curly maple. Hidden tang construction with riveted pommel.
Sheath:
Cow hide and ostrich leg skin.
Size:
OAL - 40cm, blade 27cm, blade thickness 6,5mm.
Weigth:
850g.
Elanis
Hunting knife.
Blade:
Elmax - PM stainless steel. Flat bevels. Acid stonewash finish. Hardness 59-60 HRC.
Handle:
Guard - hamered and hardened W1 carbon steel. Handle - European red deer antler. Hidden tang construction secured by a st. steel pin. Hamered and hardened spring steel butt cap.
Sheath:
Cow hide 4mm.
Size:
OAL - 32cm, blade 19cm, blade thickness 5,2mm
Weigth:
460g.
Almas
Outdoor knife
Blade:
Elmax - PM stainless steel. Flat bevels. Acid stonewash finish. 59-60 HRC.
Handle:
Stabilized maple burl, st. steel pins, tube and mozaic pin. Full tang construction.
Sheath:
Cow hide 4mm and bull frog skin.
Size:
OAL - 27cm, blade 14cm, blade thickness 4,6mm.
Weigth:
290g.
Anguis
Outdoor knife
Blade:
Hand forged W110 carbon steel (EZH, 1.1645). Diferentialy hardened with clay. Hamered sides. Flat bevels. Etched and polished finish. Hardness 60 HRC.
Handle:
Guard - hamered, blued and polished mild steel. Handle - st. steel, stabilized maple burl, dezert ironwood and mozaic pin. Hidden tang construction.
Sheath:
Cow hide 4mm and ostrich leg skin.
Size:
OAL - 25cm, blade 12cm, blade thickness 5mm.
Weigth:
230g.
Fafnir
Hunting knife
Blade:
Elmax - powder metalurgy stainless steel. Flat bevels. Hammered sides. Etched surface finish. Hardness 59 HRC.
Handle:
Guard and pommel - hamered, aged and polished brass. Handle - brass, Black locust burl (Robinia), wenge wood and brass mozaic pin. Hidden tang construction with riveted pommel.
Sheath:
Cow hide 4mm and ostrich leg skin inlay.
Size:
OAL - 32,5cm, blade 19,5cm, thickness 5mm.
Weigth:
420g.
Kaiman
Hunting knife.
Blade:
Elmax - powder metalurgy stainless steel. Flat bevel grind. Satin finish (grit 1000). Hardness 59-60 HRC.
Handle:
Guard - hamered and polished st. steel. Handle - stabilized ash wood. Hidden tang construction secured with a st. steel pin.
Sheath:
4mm cow hide and ray skin.
Size:
OAL - 30,5cm, blade 17,5cm, blade thickness 4,5mm.
Weigth:
310g.
Kveite
Hunting knife.
Blade:
Elmax - powder metalurgy stainless steel. Flat bevels. Satin finish (1200 grit). Hardness 59-60 HRC.
Handle:
Guard and pommel - hamered and polished stainless steel. Handle - st. steel, fiber, mozaic pin, Padauk wood and Arizona Dezert ironwood. Hidden tang construction with riveted pommel.
Sheath:
Cow hide and ostrich leg skin.
Size:
OAL - 31cm, blade 18cm, blade thickness 5,2mm.
Weigth:
400g.
Sander
Hunting knife.
Blade:
O2 carbon tool steel (1.2842, K720 or ČSN 19312). Flat bevel grind. Hardness 59 HRC. Etched surface finish with visible steel structure.
Handle:
Guard - hamered, blued and polished mild steel. Handle - st. steel, fiber,stabilized maple and stabilized ash wood (Fraxinus). Hidden tang construction secured with st. steel pin.
Sheath:
4mm thick cow hide.
Size:
OAL - 33,5cm, blade 20cm, blade thickness 6mm.
Weigth:
435g.
Knife slighty inspired by zander fish (Sander).
